CN Industrial Supplies - Washers

Flat Washers, USS Pattern (Size W), Unhardened

  • PFC Product Category: 00370.
  • Typical Material: Low Carbon Steel (made from scrap pieces of steel)
  • Material and Mechanical Properties: No requirements
  • Dimensions: ANSI B18.22.1, Table 1A, Size "W"
  • Other specification: ASTM F844
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hot-Dip Galvanized: Purchased to meet ASTM A153.
  • Hardness: No hardness requirements exist in the specifications

Hardened Flat Washers, USS Pattern (Size W)

  • PFC Product Category: 00372.
  • Typical Material: Medium Carbon Steel
  • Material and Mechanical Properties: ASTM F436
  • Dimensions: ANSI B18.22.1, Table 1A, Size "W"
  • Marking: Manufacturers I.D. mark
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3C
  • Hardness: HRC 38-45

Flat Washers, SAE Pattern (Size N), Unhardened

  • PFC Product Category: 00375.
  • Typical Material: Low Carbon Steel (made from scrap pieces of steel)
  • Material and Mechanical Properties: No requirements
  • Dimensions: ANSI B18.22.1, Table 1A, Size "N"
  • Other specification: ASTM F844
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hardness: No hardness requirements exist in the specifications


Hardened Flat Washers, SAE Pattern (Size N)

  • PFC Product Category: 00374.
  • Typical Material: Medium Carbon Steel
  • Material and Mechanical Properties: ASTM F436
  • Dimensions: ANSI B18.22.1, Table 1A, Size "N"
  • Marking: Manufacturers I.D. mark
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3C
  • Hardness: HRC 38-45

Flat Washers, ASTM F436

  • PFC Product Categories: 00385 & 00386.
  • Typical Material: Carbon Steel
  • Material and Mechanical Properties: ASTM F436
  • Dimensions: ASTM F436
  • Marking: Manufacturers I.D. mark (some mfg's may also mark with "F436", but it
    is not required by ASTM F436)
  • PFC Product Category 00386 washers are made in the USA
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hot-Dip Galvanized: Purchased to meet ASTM A153 and/or ASTM F2329
  • Hardness: Per ASTM F436 (HRC 38-45 for plain and plated washers, HRC 26-45
    for hot-dip galvanized washers)


Fender Washers

  • fender-washerPFC Product Category: 00380
  • Typical Material: Low Carbon Steel (made from scrap pieces of steel)
  • Material and Mechanical Properties: No requirements
  • Dimensions: ASME B18.21.1
  • Other specification: ASTM F844
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hardness: No hardness requirements exist in the specifications


PFC9 Thick Hardened Flat Washers

  • thickhardenedflatwasherPFC Product Categories: 00098 (USS Pattern) and 00099 (SAE Pattern)
  • Typical Material: 1050 Carbon Steel
  • Hardness: HRC 40-45
  • Dimensions: ANSI B18.22.1
  • Marking: Manufacturers I.D. mark and "PFC9"
  • Zinc Yellow Plating: Purchased to meet ASTM B633-98, Type II, Class Fe/Zn5
  • All washers are made in the USA from steel melted and manufactured in the
    USA


Split Lock Washer

  • split-lock-washerPFC Product Category: 00350
  • Typical Material: 1055 – 1065 Carbon Steel
  • Material and Mechanical Properties: ASME B18.21.1.
  • Dimensions: ASME B18.21.1
  • Zinc-Clear Plating: Purchased to meet ASTM F1941 FeZn3C
  • Hot-dip galvanized coating per ASTM A153
  • Typical Hardness: HRC 38-46


Master Seal

mastersealMaster Seal Washers use a unique bonding process, which bonds a strong backing material to a resilient facing material. Where sealing challenges are presented, the conical design directs the flow of the elastomeric portion toward problem areas. When problems call for cushioning or vibration control, the facing material will also provide the solution.


Current Specials

Location

CN Industrial Supplies Ltd.
176 Spanish Town Road, Shop #10
Kingston 11, Jamaica
Tel: (876) 923–0589

Providing more than just fasteners, CN Industrial Supplies partners with you to ensure you get the products, services and programs you need to.

Home| About | Nuts | Screws | Washers | Bolts | Cutting Tools | Adhesives | Springs | Pipe Fittings | Expansion Bolts | Thread Repair| Contact | Sitemap © 2011 CN Industrial Supplies Limited. Powered by Jamaica Yellow Pages
 
Home