CN Industrial Supplies - Bolts

Hex Bolts, Full Body, Inch Series

  • hex-boltsPFC Product Categories: 00024, & 00026.
  • Manufacturers test reports are typically available for this product.
  • Typical Material: Low Carbon Steel
  • Material and Mechanical Properties: Purchased to meet ASTM A307 Grade A.
  • Dimensions: ASME B18.2.1, Full Body, Rolled Threads
    • Standard thread length on bolt lengths up to 9 ¾ inches. 6 inches of threads on lengths 10 inches and longer.
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hot-Dip Galvanized: Purchased to meet ASTM A153.
  • Typical Hardness: HRB 69-100
  • Tensile Strength: 60,000 PSI Minimum


Heavy Hex Bolts, Grade B, Full Body, Inch Series

  • PFC Product Category: 00030.
  • Manufacturers test reports are typically available for this product.
  • Typical Material: Low Carbon Steel
  • Material and Mechanical Properties: Purchased to meet ASTM A307 Grade B.
  • Dimensions: ASME B18.2.1, Full Body, Rolled Threads
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hot-Dip Galvanized: Purchased to meet ASTM A153.
  • Typical Hardness: HRB 69-95
  • Tensile Strength: 60,000 PSI Minimum / 100,000 PSI Maximum.


Hex Tap Bolts, Inch Series, Grade A

  • hextapbolts-grade-APFC Product Category: 00022
  • Typical Material: Low Carbon Steel
  • Material and Mechanical Properties: Purchased to meet ASTM A307 Grade A.
  • Dimensions: ASME B18.2.1, Rolled Threads
    • Fully threaded on lengths up to 6 inches. Approximately 6 inches of threads
      on lengths longer than 6 inches with undersize body.
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hot-Dip Galvanized: Purchased to meet ASTM A153.
  • Typical Hardness: HRB 69-100
  • Tensile Strength: 60,000 PSI Minimum


Carriage Bolt, Inch Series, Grade A

  • carriage-boltPFC Product Category: 00100
  • Typical Material: Low Carbon Steel
  • Material and Mechanical Properties: Purchased to meet ASTM A307 Grade A.
  • Dimensions: ASME B18.5, Round Head Square Neck Bolt, Rolled Threads
    • Full thread to 6 inches in length.
    • Undersize body and 6 inches of threads on lengths over 6 to 12 inches.
    • 6 inches threads and full size body on lengths over 12 inches.
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hot-Dip Galvanized: Purchased to meet ASTM A153.
  • Typical Hardness: HRB 69-100
  • Tensile Strength: 60,000 PSI Minimum


Carriage Bolt, Inch Series, Grade 5

  • PFC Product Category: 00105
  • Typical Material: Medium Carbon Steel
  • Material and Mechanical Properties: Purchased to meet SAE J429 Grade 5.
  • Dimensions: ASME B18.5, Round Head Square Neck Bolt, Rolled Threads
    • Full thread to 6 inches in length.
    • Normally available in sizes ¼ through ¾.
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Typical Hardness: HRC 25-34 on sizes ¼ to 1 inch
  • Tensile Strength: 120,000 PSI Minimum on sizes ¼ to 1 inch


Hex Lag Screws, Inch Series

  • hexlagscrewsPFC Product Category: 00110.
  • Manufacturers test reports are not normally available for this product.
  • Typical Material: Low Carbon Steel
  • Material Properties: Purchased to meet SAE J429 Grade 1.
  • Dimensions: ASME B18.2.1, Full Body, Rolled Threads
    • Lag screws longer than 12 inches will have a minimum thread length of 50%
      of screw length up to a maximum of 8 inches.
  • Zinc Plating: Purchased to meet ASTM F1941 FeZn3A
  • Hot-Dip Galvanized: Purchased to meet ASTM A153.
  • Typical Hardness: HRB 70-100
  • Tensile Strength of steel (not pull-out): 60,000 PSI Minimum (Note lag screws are
    not tensile tested)
  • Information on lag screw strengths in wood can be found at the following
    websites: Fs.fed.us and www.awc.org

Current Specials

Location

CN Industrial Supplies Ltd.
176 Spanish Town Road, Shop #10
Kingston 11, Jamaica
Tel: (876) 923–0589

Providing more than just fasteners, CN Industrial Supplies partners with you to ensure you get the products, services and programs you need to.

Home| About | Nuts | Screws | Washers | Bolts | Cutting Tools | Adhesives | Springs | Pipe Fittings | Expansion Bolts | Thread Repair| Contact | Sitemap © 2011 CN Industrial Supplies Limited. Powered by Jamaica Yellow Pages
 
Home